Select the Time and State Filter tab.
Do one of the following to specify how alarms are filtered by time.
Option 1. Display alarms regardless of when they occurred
Clear Use Time Filter.
Alarms that have not been removed from the list by other means, e.g. acknowledge and reset, display, regardless of when they occurred.
Option 2. Display alarms that occurred since a specified time
Check Use Time Filter.
The Select alarms since: field is enabled and displays the current date and time.
Enter the date and time that is the start criteria for displaying alarms.
Important: Enter hours as 1-23. There is no AM/PM specification.
Check the options in the Filter by State box to limit the alarms displayed on the Alarm List to only those that occur in the state you select.
The options are:
State–Ack Status |
Check to |
Alarm–N |
Display points in Alarm State that have not been acknowledged. |
Alarm–Y |
Display points in Alarm State that have been acknowledged. |
Normal–N |
Display points that have returned to a normal state but have not been acknowledged. |
Step 3.1.4. Configure the AMV time, state and sort. |