Step 1.4. Configure the Field Display Order for Each View

  1. Select a field when you are in either mode.

The field's relative to other fields determines which buttons (to the right of the Fields box) are enabled.

  1. Click the buttons according to where you want the field to display in the Alarm Viewer. The buttons that are enabled might change as the field moves.

Button

Each Click Moves the Field

Position Left

One column left.

Position Right

One column right.

Row Up

Up one row, to the furthest left position in an alarm's message area.

Note: The button will only be active if there is a row above the one in which the field is placed.

Example

You:

Start with two rows for each alarm message.

Select Alarm ID, which currently is in the second row.

Click Row Up once.

The Alarm ID appears in the first row, furthest left position of each alarm's message. Row Up is no longer active when Alarm ID is selected.

Row Down

Down a row in the message. The field will be placed at the start of the message row. (The maximum row number is 10.)

Example

You

Start with two rows for each alarm message.

Select Alarm ID, which currently is in the first row.

Click Row Down twice.

The Alarm ID appears in the third row of each alarm's message.

More information

Step 1. Select the AMV Control/Stand-alone AMV Alarm List Fields