Register Memory Addressing

Registers are 16 bit words. You can configure Analog or Boolean point types to read registers.

For Analog point types, enter the address in the Address field. For example, R10 specifies Register 10.

For Boolean point types, enter the register number in the Address field and the bit offset (from 0 to 15) in the Address Offset field. For example, an address of R25 with an address offset of 0 specifies the first bit in Register 25, while an address of R25 and an address offset of 4 specifies the fifth bit in Register 25.

More information

CCM2 point configuration notes.