Purpose
Display a directory of registered part programs in CNC memory.
Correct usage
C:\> cnc_edir <ipaddr> <portnum> <pathnum> [/w]
Usage defined
|
<ipaddr> |
IP address of the CNC. |
||
|
<portnum> |
Port number of the CNC. |
||
|
<pathnum> |
CNC path. Enter one of the following. |
||
|
|
Value |
Path |
|
|
|
0 |
None |
|
|
|
1 |
First |
|
|
|
2 |
Second |
|
|
|
3 |
Third |
|
|
|
4 |
Fourth |
Series 300i/310i/320i only |
|
|
5 |
Fifth |
Series 300i/310i/320i only |
|
|
6 |
Sixth |
Series 300i/310i/320i only |
|
|
7 |
Seventh |
Series 300i/310i/320i only |
|
|
8 |
Eighth |
Series 300i/310i/320i only |
|
|
9 |
Ninth |
Series 300i/310i/320i only |
|
|
10 |
Tenth |
Series 300i/310i/320i only |
|
|
If the CNC does not support multiple paths, enter 0. |
||
|
/w |
Optional request for a wide directory listing. |
||
Example
A directory of part programs registered in CNC memory is displayed, along with comments and sizes:
C:\> cnc_edir 3.26.7.150 8172 0
Program Comment Size
O0020 TEST PROGRAM 20 216
O0038 TEST PROGRAM 38 432
O0039 TEST PROGRAM 39 288
O0040 TEST PROGRAM 40 288
O0041 TEST PROGRAM 41 216
O0042 TEST PROGRAM 42 720
6 Total file(s).
C:\> cnc_edir 3.26.7.150 8172 0 /w
O0020 O0038 O0039 O0040 O0041 O0042
6 Total file(s).
C:\>
Following is a list of possible errors:
Bad directory info.
CNC memory protected.
|
|
CNC Part Program Command Line Utilities for FOCAS/Ethernet. |
