Purpose
Download one or more files from the PC to CNC memory. Each file may contain a single part program or a sequence of part programs.
Correct usage
C:\> cnc_edownload <ipaddr> <portnum> <pathnum> <filespec1> [<filespec2>] [<filespec3>]…
Usage defined
|
<ipaddr> |
IP address of the CNC. |
||
|
<portnum> |
Port number of the CNC. |
||
|
<pathnum> |
CNC path. Enter one of the following. |
||
|
|
Value |
Path |
|
|
|
0 |
None |
|
|
|
1 |
First |
|
|
|
2 |
Second |
|
|
|
3 |
Third |
|
|
|
4 |
Fourth |
Series 300i/310i/320i only |
|
|
5 |
Fifth |
Series 300i/310i/320i only |
|
|
6 |
Sixth |
Series 300i/310i/320i only |
|
|
7 |
Seventh |
Series 300i/310i/320i only |
|
|
8 |
Eighth |
Series 300i/310i/320i only |
|
|
9 |
Ninth |
Series 300i/310i/320i only |
|
|
10 |
Tenth |
Series 300i/310i/320i only |
|
|
If the CNC does not support multiple paths, enter 0. |
||
|
<filespec> |
File specification. Each file specification indicates a single file containing part program(s) to download. This may be a fully qualified filename or a filename in the current directory. |
||
Example
The contents of each file is downloaded to the CNC and displays success or failure status when it is complete:
C:\> cnc_edownload 3.26.7.150 8172 0 c:\O0001.pp c:\O0002.pp c:\O0003.pp
Beginning download:
C:\O0001.pp: Success
C:\O0002.pp: File open failed
C:\O0003.pp: Success
C:\>
The O0001.pp and O0003.pp part program files have been downloaded and registered in CNC memory. The part program O0002.pp could not be opened and was not processed.
Following is a list of possible errors.
File not found.
Failed to open file for
reading.
File contains bad program.
CNC write protect.
CNC out of memory.
|
|
CNC Part Program Command Line Utilities for FOCAS/Ethernet. |
