Points can be configured to clear the following for each tool group or any number of tool groups.
Tool life counter and
Tool information.
Specify the following for clear the tool life group points.
Point Class |
ANALOG |
Type |
INT |
Access |
Read/Write |
Valid Addresses |
CTLG<x>, where x is the tool group number and the data value is the end tool group number. |
Number of Elements |
1 |
Example 1
IF |
Address = |
CTLG1 |
|
Data Value = |
0 or 1 |
Then |
Tool Group 1 is cleared from the CNC system data. |
Example 2
IF |
Address = |
CTLG1 |
|
Data Value = |
20 |
Then |
Tool Groups 1 through 20 are cleared from the CNC system data. |
Tool Life Management data. |