Point types that can be configured for Machining series - Memory Type A or Power Mate include:
|
Single Tool offsets. |
|
|
Direction of imaginary tool nose (Series 300i /310i/320i). |
Single Tool Offsets
|
Point Class |
ANALOG |
|
Type |
REAL |
|
Access |
Read-only or Read/Write |
|
Valid Addresses |
TOSx, where x is a valid tool offset number for your CNC. |
|
Address Offset |
N/A |
Direction of imaginary tool nose (Series 300i/310i/320i only)
|
Point Class |
ANALOG |
|
Type |
REAL |
|
Access |
Read-only or Read/Write |
|
Valid Addresses |
DITNx, where x is a valid tool offset number for your CNC. |
|
Address Offset |
N/A |
|
|
Tool Offset Data |
