You can configure a point to read and write the optional 8-digit group number for each tool group.
Note: Optional Tool Group Number points can only be configured if you have purchased the Tool Life Management B option bit.
Specify the following for optional tool group number points.
Point Class |
ANALOG |
Type |
DINT |
Access |
Read/Write |
Valid Addresses |
OTGN<X>, where X is the tool group number |
Number of Elements |
1 |
Note: If a given tool group does not have any registered tools, the value of the optional tool group number will be 0. Attempts to set the optional tool group number will fail.
Tool Life Management data. |