For

Broadcast (Order Execution Mgt)

Project

Purpose

Determines what Broadcast will do when there is a data fetch error.

Broadcast does the following based on whether you disable or enable BCO_DATA_FETCH_ERROR.

Disable BCO_DATA_FETCH_ERROR

Even when there is a data fetch error

Jobs are sent to the device.

An alarm and log are generated.

Note: In a normal scenario (BCO_DATA_FETCH_ERROR is disabled or enabled) the following occurs.

Whether or not there is an error, W or A is added to the filename, as follows.

WYSIWYG

W is added.

Example

0001094033735734;W;111-11;111-11;All in One-SOLVE_PRT_EXPRT;221;YANE;111-11;.cwf

ASCII

A is added.

Example

0001094033735734;A;111-11;111-11;All in One-SOLVE_PRT_EXPRT;221;YANE;111-11;.caf

Enable BCO_DATA_FETCH_ERROR

When there is a data fetch error the following occurs.

Jobs:

Do not go to the device.

A zero is added to the filename, before the W or A. (W and A are described in the Disable BCO_DATA_FETCH_ERROR section.)

WYSIWYG

0 is added before the W.

Example

0001094033735734;0W;111-11;111-11;All in One-SOLVE_PRT_EXPRT;221;YANE;111-11;.cwf

ASCII

0 is added before the A.

Example

0001094033735734;0A;111-11;111-11;All in One-SOLVE_PRT_EXPRT;221;YANE;111-11;.caf

Stay in the active folder of the device.

This does not allow any of the subsequent jobs to be sent to the device.

A log is generated in the cor log.

An alarm is generated.

The user must:

1.   Open the file manually

2.   Enter correct data for the objects / fields which had data fetch error

3.   Rename the file by removing the appended 0,

Result: the jobs will start being posted to the device.

Value

0

(Or any value other than 1) Disabled

1

Enabled

Default Value

0

Disabled

Global parameters.