For |
Database Logger Project |
||
Purpose |
To turn on or off the database logging messages in the Status Log. If this parameter is not defined or set to zero (0), the messages are logged. |
||
Value |
Enter for one or both of the following bits: |
||
|
(Bit) |
1 |
Turns off Status Log messages that display when the logging data type has been superceded by a column type in the database table. For examples, messages would display if a UINT point type is changed to an UDINT point type after the table has been created. |
|
(Bit) |
2 |
Turns off status log messages alerting a user that the Alarm Manager resident process cannot be found. For example, messages might appear on a Viewer where there is no Alarm Manager resident process. |
Default Value |
No entry |
Note: Remaining bits are reserved for future use.
Global parameters. |