TSERV_<COM>

	TSERV_<COM> configuration
	TSERV_<COM> example

For	Marquee network Project
Purpose	To add a Marquee network COM with specifications.
Parameter ID	TSERV_<COM> Where <COM> is replaced by the COM ID that you specify in the Marquee Ports configuration window in CIMPLICITY.
Value	Format	2 ipa=<ip_address> tp=<ip_port> rd=1
	Where
	<PORT>	Is replaced by the Port ID that you specify in the Marquee Ports configuration window in CIMPLICITY.
	<ip_address>	Is replaced by the IP address of your terminal server.
	<ip_port>	Is replaced by the telnet port number.
	rd	(Reconnect delay) defines the number of seconds to wait before attempting a reconnection on this communication port. A reconnection delay value of 0 will treat a reconnection failure as a fatal error condition, and the Marquee resident process will terminate. Thus, it is recommended that you use an rd of 1 or 2.
Default	NA

TSERV_<COM> Example

Note: This entry indicates that the marquee resident process should communicate with the port on the terminal server:

You would specify COM1 as the Port ID in the Marquee Ports configuration window.

Note: If you open the glb_parms.idt file you will see that the global parameter is listed in the following format.

TSERV_<COM>|1|2 ipa=<ip_address> tp=<ip_port> rd=1 mt=5

Where

|1| defines the parameter type as a string.

2. Configure a CIMPLICITY Terminal Server port.