If you check the Telnet or TCP connection method, define the following.
Socket Options |
Keepalives |
Check to use keepalives to detect the loss of the terminal server. |
|
TCP Nodelay |
Check if you want to set the Nodelay flag on the socket. |
IP Address |
Enter the IP address of the terminal server. |
|
TCP Port |
Enter the port number of the TCP port on the terminal server. |
|
Linger Time |
Enter the time in seconds to wait after closing the socket before aborting the socket. |
|
Telnet Connect Wait |
Enter the time in seconds to wait for the Telnet protocol to initialize. |
|
Connect Timeout |
Enter the time in seconds to wait for the TCP connection to form. |
|
Reconnect Delay |
Enter the time in seconds to wait before attempting to reconnect to a device. If you set this value to zero and the terminal server is not available, then no attempts will be made to reconnect to the terminal server. |
Modbus RTU port configuration. |