; Device level parameters
; UseTheseDomainSizes - When enabled (=1), use the sizes defined in the INI
; to defined the memory sizes for each domain
; When disabled (=0), for STAT_PLC, use the following
; defaults:
; Max Coils : 32768 elements
; Max Input Status: 32768 elements
; Max Input Regs: 16384 elements
; Max Holding Regs: 16384 elements
; All other memory types are 0 elements
;; For all other device models, the device communication
; interface will attempt to size the memory
;
; The default value is 0
;
; UseCounts - When enabled (=1), indicates sizes are in elements
; When disabled (=0) indicates sizes are in bytes
;
; Default value is 0
;
; ConservesConn - When enabled (=1), indicates that it is normal for the device
; to close the connection (typically based on inactivity). The
; device communication interface will not assume that the
; device is down unless it is unable to create a connection and
; get a response when it attempts the current scheduled
; operation to retrieve data from the device or modify data.
;
; When disabled (=0), indicates that a termination of the
; connection between the device communication interface and
; the device will cause the device communication interface to
; assume that the connection is down and terminate the
; connection
;
; Default value is 0.
;
; ConnSecondary - When Enabled (=1), in a Host Redundant environment,
; the device communciation interface will attempt to
; maintain a connection with the device on the acting
; secondary.
;
; When Disabled(=0), in a Host Redundant environment,
; the device communication interface will terminate its
; connection to the device when transitioning to the
; secondary.
;
; Default value is 1.
;
; OneCoilWrite - When enabled (=1) use Function 5 to write single coils
; When disabled (=0) use Function 15 to write single coils
;
; VersaMax ENIU, VersaPoint ENIU and Modicon 484's ignore this
; parameter.
;
;OneRegiserWrite - When enabled (=1) use Function 6 to write single holding registers
; When disabled (=0) use Function 16 to write single holding registers
;
; VersaMax ENIU, VersaPoint ENIU and Modicon 484's ignore this
; parameter.
;
[DEVICE1]
UseTheseDomainSizes=1
UseCounts=0
OneCoilWrite=0
OneRegWrite=0
ConservesConn=1
ConnSecondary=0
COILS=65535
DISC INPUTS=65535
INPUT REG.=65535
HOLDING REG.=65535
GEN REF FILE1=0
GEN REF FILE2=0
GEN REF FILE3=0
GEN REF FILE4=0
GEN REF FILE5=0
GEN REF FILE6=0
GEN REF FILE7=0
GEN REF FILE8=0
GEN REF FILE9=0
GEN REF FILE10=0
DP_INPUT REG.=0
DP_HOLDING REG.=0
[DEVICE2]
UseTheseDomainSizes=1
UseCounts=0
OneCoilWrite=0
OneRegWrite=0
ConservesConn=1
ConnSecondary=0
COILS=65535
DISC INPUTS=65535
INPUT REG.=65535
HOLDING REG.=65535
GEN REF FILE1=0
GEN REF FILE2=0
GEN REF FILE3=0
GEN REF FILE4=0
GEN REF FILE5=0
GEN REF FILE6=0
GEN REF FILE7=0
GEN REF FILE8=0
GEN REF FILE9=0
GEN REF FILE10=0
DP_INPUT REG.=0
DP_HOLDING REG.=0
Step 1.2.3.2. Configure INI Parameters. |