Device Point Properties

On the Device tab:

Update Criteria	The update criteria determines how the data will be requested.
	Select On Change or On Scan for points whose values should be polled by the OMRON TCP/IP driver at regular intervals.
	Select On Demand On Scan or On Demand On Change for points whose values should be polled by the OMRON TCP/IP driver at regular intervals while users are viewing them.
Address	Point address requirements are device-dependent. Valid device types are: C-Series CV-Series See the sections below for detailed information on the point address requirements for each device type.

When you configure BOOL points from non-discrete memory (such as CIO, HR or DM) you must also enter data in the following field:

Bit Offset

Enter the bit offset in the 16-bit memory word that defines the point where 0 is the least significant bit and 15 is the most significant bit.

Warning

Do not enter a data Bit Offset for Point Type BOOL for Timer and Counter Completion Statuses or Temporary Relay (TR). Leave the field as the default 0.

More information

Point configuration.