The OMRON TCP/IP Communication enabler supports direct communications to the following programmable controllers:

	CV500	CVM1-CPU01-E	CV1000
	CVM1-CPU11-E	CVM1-CPU21-E	CV2000

The following C-Series programmable controllers are supported when connected to a subnetwork, that is through a CV bridge, with FINS commands:

C200H-CPU11-E (requires use of C200HSLK11/SLK21-V1 SYSMAC LINK Unit)

C1000H-CPU01-EV1 (requires use of C1000H-SLK11/SLK21-V1 SYSMAC LINK Unit)

C2000-CPU-EV1 (requires use of C1000H-SLK11/SLK21-V1 SYSMAC LINK Unit).

When configuring communications to programmable controllers on subnetworks, you must ensure that the programmable controllers attached to the Ethernet are configured with the proper routing tables to reach the desired programmable controllers on the subnetworks. Refer to the OMRON documentation for details on setting up these routing tables.

---