Writing Data

You can write data to valid data areas. Valid data areas are determined by the programmable controller type. The format for entering a data address is the same one you use when you configure points for a CIMPLICITY project.

To write data to the targeted programmable controller:

  1. Enter a valid data address in the Data address field to the left of the Write button. This activates the Data value field.

  2. Enter the data value you want to write in hexadecimal notation in the Data value field. This activates the Write button.

  3. Select Write.

The status message field displays a message indicating the success or failure of the write request.

More information

    Validating OMRON TCP/IP communications.