Certain protocol parameters used by the OMRON communications enabler have been preset. They are:
|
Parameter |
Value |
Description |
|
DN2 |
0 |
Unit Address - 0 indicates the programmable controller's CPU. This is not the same as the unit number (that is, node number) which is configurable. |
|
SNA, SA1 |
0,0 |
Source of local network and node number. |
|
SA2 |
FE |
Source of communication unit |
|
SID |
FF |
Service ID. |
|
|
About OMRON Host Link Communications. |
