Use the General tab in the Device dialog box to enter general information for the device. You can define the following:
Port |
Select the port for this device. Click buttons to the Port field to select the port as follows. |
|
|
|
Display the list of ports and select one. |
|
|
Create a new port, edit the current port, or select a port from the list of ports. |
Description |
Enter an optional description to help you identify the device. |
|
Resource |
Enter a resource that can be associated with this device for alarm generation. Click buttons to the right of the Resource field to select the resource, as follows. |
|
|
|
Display the list of resources and select one. |
|
|
Create a new resource, edit the current resource, or select a resource from the list of resources. |
Model Type |
Select the type of device. Click the drop-down button to the right of the input field to display your choices. Use the following information to make your selection. |
|
Model Type |
Supported Programmable Controllers |
|
C Series and |
C200H CPU11 E, C1000H CPU01 EV1 and C2000H CPU-EV1. Note: C Series controllers are only accessible via a CV Series controller acting as a gateway. |
|
CS-1 Series |
CS1H-CPU64-V1 |
|
CV Series and |
CV500, CVM1 CPU01 E |
|
CV Series Ext. and CV Series Ext. Static |
CV1000, CV2000 and CVM1 CPU11 E or others with Expanded DM |
|
CVM1 V2 and |
CVM1 -CPU21 EV2 and programmable controllers with IEEE Floating Point capability |
OMRON TCP/IP device configuration. |