If the targeted controller is not connected to the Ethernet directly but is on a subnetwork, then provide the following information on the CV controller connected to the Ethernet network that is acting as a gateway:
|
The IP address configured for the module.
|
|
|
The subnet mask configured for the module.
|
|
|
UDP FINS Port Number configured.
|
|
|
Type of IP address conversion configured, table lookup or automatic address generation. |
|
|
Node Number Rotary Switch setting.
|
|
|
The SA1 value defined via the global parameter file.
|
|
|
|
Technical support worksheet. |
