The OMRON TCP/IP Communication enabler supports direct communications to the following programmable controllers:
|
CV500 |
CVM1 CPU01 E |
CV1000 |
|
CVM1 CPU11 E |
CVM1 CPU21 E |
CV2000 |
|
CS1H-CPU64-V1 |
|
|
The following C Series programmable controllers are supported when connected to a subnetwork, that is through a CV bridge, with FINS commands:
C200H CPU11 E
(requires use of C200HSLK11/SLK21 V1 SYSMAC LINK Unit)
C1000H CPU01 EV1
(requires use of C1000H SLK11/SLK21 V1 SYSMAC LINK Unit)
C2000 CPU EV1
(requires use of C1000H SLK11/SLK21 V1 SYSMAC LINK Unit).
When configuring communications to programmable controllers on subnetworks, you must ensure that the programmable controllers attached to the Ethernet are configured with the proper routing tables to reach the desired programmable controllers on the subnetworks. Refer to the OMRON documentation for details on setting up these routing tables.
|
|
About OMRON TCP/IP Communications. |
