Error codes that can be set directly by the Point Management Resident Process are:
Number |
Defined Constant |
Description |
24551 |
PTMRP_INVAL_ALRM_FLD |
Invalid alarm field specified |
24552 |
PTMRP_INVAL_SVC_REQ |
Invalid service request |
24553 |
PTMRP_INVAL_MSG |
Invalid message received |
24554 |
PTMRP_DUP_POINT_ID |
Duplicate point id |
24555 |
PTMRP_INVAL_POINT_STATE |
Invalid point state |
24556 |
PTMRP_INVAL_COMM_STATE |
Invalid communication state |
24557 |
PTMRP_INVAL_DEVICE_ID |
Invalid device id |
24558 |
PTMRP_LINK_DOWN |
Logical link down |
24559 |
PTMRP_INVAL_MSG_TYPE |
Invalid message type |
24560 |
PTMRP_NO_HEADER |
No header segment found in message |
24561 |
PTMRP_INVAL_MSG_LEN |
Message length exceeds expected length |
24562 |
PTMRP_INVAL_DEVICE_STATE |
Invalid device state |
24563 |
PTMRP_INVAL_POINT_ID |
Invalid point id |
24564 |
PTMRP_MSG_TOO_LARGE |
Message exceeds available buffer space |
24565 |
PTMRP_LOST_AP_REQ |
Lost application request DMS pointer |
24566 |
PTMRP_NULL_PTR |
Specified pointer has value NULL |
24567 |
PTMRP_MUST_BE_DP |
Only a derived point process may update a point |
24568 |
PTMRP_NOT_OWNER_DP |
Not the owner derived point process for specified point |
24569 |
PTMRP_NO_WARNING |
No warning limit configured for point |
24570 |
PTMRP_NO_WARNING_LOW |
No Alarm Lo-1 limit configured for point |
24571 |
PTMRP_NO_WARNING_HIGH |
No Alarm Hi-1 limit configured for point |
24572 |
PTMRP_NO_ALARM |
No alarm limit configured for point |
24573 |
PTMRP_NO_ALARM_LOW |
No Alarm Lo-2 limit configured for point |
24574 |
PTMRP_NO_ALARM_HIGH |
No Alarm Hi-2 limit configured for point |
24575 |
PTMRP_MUST_BE_DEVP |
Only a device point may be set |
24576 |
PTMRP_NO_LIMITS_AVAIL |
No ALARM/WARNING limits available for the point |
24577 |
PTMRP_POINT_IN_REQ_STATE |
Point is already in the requested ALARM/WARNING state |
24578 |
PTMRP_NO_ALARM_CONF |
Point is not configured with a valid alarm |
24579 |
PTMRP_NO_RANGE_LOW |
No range low limit configured for point |
24580 |
PTMRP_NO_RANGE_HIGH |
No range high limit configured for point |
24581 |
PTMRP_NO_DEADBAND |
No deadband configured for point |
24582 |
PTMRP_NO_EU_CONV |
No EU conversion record found in SC EU conv file for point = |
24583 |
PTMRP_ALARM_ID_NOT_IN_SC |
No alarm found in SC Alarm Def file for alarm id = |
24584 |
PTMRP_FR_ID_NOT_IN_SC |
No fact. rsrc. ID found in SC FR file for FR id = |
24585 |
PTMRP_ALARM_MGR_NOT_IN_SC |
No alarm mgr found in SC Alarm Mgr file for alarm mgr = |
24586 |
PTMRP_PROC_ID_NOT_IN_SC |
PTM proc ID not found in SC Proc Id file for proc id = |
24587 |
PTMRP_POINT_NOT_IN_SC |
No record found in SC point file for point = |
24588 |
PTMRP_POINT_TYPE_NOT_IN_SC |
Point type not found in SC point type file for point = |
24589 |
PTMRP_NO_WRT_ACCESS |
No write access for point |
24590 |
PTMRP_POINT_DISABLED |
Cannot set a disabled point |
24591 |
PTMRP_INIT_OUT_OF_RANGE |
Initial value is out of range for point = |
24592 |
PTMRP_INVALID_ALARM_CRIT |
Invalid Alarm Criteria for point = |
24593 |
PTMRP_NULL_DEVPT_SPEC |
Deviation point unspecified for point = |
24594 |
PTMRP_INVALID_DEV_TYPE |
Invalid Deviation point type for point = |
24595 |
PTMRP_INVALID_SAMPLE_INIT |
Invalid sample interval for point = |
24596 |
PTMRP_INVALID_RATE_TYPE |
Invalid Rate of Change point type for point = |
24597 |
PTMRP_INV_SAFPT_TYPE |
Safety point <%s> is invalid type for point <%s> |
24598 |
PTMRP_INV_SAFPT_PT |
Safety point <%s> not allowed for Derived point <%s> |
24599 |
PTMRP_INV_SAFPT |
Point <%s> cannot be its own Safety Point |
24600 |
PTMRP_SAF_BAD_CONFIG |
Safety point <%s> not configured for point <%s> |
24601 |
PTMRP_INV_DEVPT_TYPE |
Deviation point <%s> is invalid type for point <%s> |
24602 |
PTMRP_DEV_BAD_CONFIG |
Deviation point <%s> not configured for point <%s> |
24603 |
PTMRP_SAFPT_NOT_AVAIL |
Setpoint fail: <%s> - Safety point <%s> UNAVAILABLE |
24604 |
PTMRP_SAFETY_FAIL |
Setpoint fail: <%s> - Safety point <%s> SET TO FALSE |
24605 |
PTMRP_NO_ALARM_LIMITS |
No Alarm Limits specified for point = |
24606 |
PTMRP_DEVPT_ABS_LIMIT |
Using Alarm Limit absolute value for Deviation point = |
24607 |
PTMRP_NO_ARRAY_PT |
Array point not allowed for point = |
24608 |
PTMRP_LOST_POINT_REQ |
Lost point request DMS pointer |
24609 |
PTMRP_BAD_DC_SVC_REQ |
Unsupported DEVCOM service request |
24610 |
PTMRP_NO_REDUND_SVC |
Host redundancy specified but single PTM service configured |
24611 |
PTMRP_REDUND_CFG_ERR |
Host redundancy configuration error |
24612 |
PTMRP_UNEXPECTED_TRANS |
Unexpected TRANSITION message received - ignored |
24613 |
PTMRP_UNEXPECTED_MAST |
Unexpected MASTER message received - ignored |
24614 |
PTMRP_INVALID_MAST |
Invalid MASTER message received - ignored |
24615 |
PTMRP_PARTNER_NOT_FOUND |
Partner record not found in schema |
24616 |
PTMRP_FORCED_ROLL_UP |
Received request for forced roll on partner recovery |
24617 |
PTMRP_FORCED_ROLL_DN |
Received request for forced roll on partner failure |
24618 |
PTMRP_LOGTRANS_FAILED |
failed to translate logical name for archive |
24619 |
PTMRP_UNEXPECTED_PART_UP |
Partner recovery notice without previous partner failure |
24610 |
PTMRP_NO_DL_ON_NODE |
No DL process on this node - no forced rollover |
24621 |
PTMRP_NO_PTDL_ON_NODE |
No PTDL process on this node - no forced rollover |
24622 |
PTMRP_SERVICE_NOT_OPEN |
Failed to open service file - no forced rollover |
24623 |
PTMRP_NO_BUF_VALUES |
No buffered values for point = |
24624 |
PTMRP_INVALID_BUF_VALUE |
Invalid maximum point buffering and duration for point = |
24625 |
PTMRP_ADHOC_REQ |
|
24626 |
PTMRP_ADHOC_CREATE |
Point By Address Created: %.50s |
24627 |
PTMRP_ADHOC_DELETE |
Point by Address Deleted: %.50s |
24628 |
PTMRP_TRIGGER_NOT_AVAIL |
Point %.16s availability trigger %.16s is unavailable. |
24629 |
PTMRP_TRIGGER_FAIL |
Point %.16s availability trigger %.16s is not numeric. |
24630 |
PTMRP_INV_TRIGGER_OWN |
Point %.32s cannot be its own availability trigger. |
24631 |
PTMRP_INV_TRIGGER_TYPE |
Point %.16s availability trigger %.16s is not numeric. |
24632 |
PTMRP_INV_TRIGGER_CFG |
Point %.16s availability trigger %.16s is not configured. |
24633 |
PTMRP_INV_TRIGGER_STATE |
Point %.16s has an invalid availability trigger %.16s. |
24634 |
PTMRP_CANNOT_HAVE_TRIGGER |
A derived point %.16s cannot have an availability trigger %.16s. |
24635 |
PTMRP_POINT_ES_ID_MISMATCH |
Old/Invalid ES alias point ID - |
24636 |
PTMRP_POINT_INV_ES_REQ |
Invalid ES alias point ID request from |
Point Management error messages. |