On the Device tab in the Point Properties dialog box:
Update Criteria |
The update criteria determine how the data will be requested. |
|
Select On Change or On Scan for points whose values should be polled by the Sharp TCP/IP driver at regular intervals. |
|
Select On Demand On Scan or On Demand On Change for points whose values should be polled by the Sharp TCP/IP driver while users are viewing them. |
|
Select Unsolicited for points whose value will be sent by the programmable controller as necessary. |
Address |
Enter the point address of the data in the following format: |
|
The offset is entered in octal. |
|
Please refer to the Sharp PLC documentation for the detailed information on these memory types. |
|
Use the following address for a Write Enable Status point: |
|
WRITE_MODE |
Sharp TCP/IP point configuration. |