General Device Properties

When you configure a Toyopuc device, the Device Properties dialog for devices using this protocol opens.

Use the General Properties tab to enter general information for the device. You can define the following:


Select the port for this device. You can click the Browser button to the right of the field to display the list of ports and select one.

You can click the Pop-up Menu button-to create a new port, edit the current port, or select a port from the list of ports.


Enter an optional description to help you identify the device.


Enter a resource that can be associated with this device for alarm generation.

Model type

Enter Toyoda PC2


Use the default properties to enter information about communications for the device. You can define the following:


Enter the device address following the specification in the Device Addresses section.


Enter 0


Set this check box to enable the device when the project starts. If you clear this check box, the device will not be enabled and points associated with the device will be unavailable.

More information

Toyopuc device configuration.