The RCO directory is organized in a hierarchy so that information for a control site can be easily accessed, viewed, and modified.
Each level of data in the RCO hierarchy has a function as follows:
|
1 |
Contains all of the instructions for making production routing decisions in the RCO configuration. |
|
|
2 |
Control sites folder |
Contains all of the instructions for making production routing decisions for a group of control sites. |
|
3 |
Control site |
Contains all of the instructions for making production routing decisions for a control sites. |
|
4 |
Trigger folder |
Folder that holds all of the configured triggers for the control site. |
|
5 |
Trigger |
One or more points that will activate the control site when its defined conditions are met. |
|
6 |
Decisions folder |
Folder that holds all of the configured decisions for the control site. |
|
7 |
Decision |
Selected for configuration. Instructions for executing an output module, which in turn, sets a series of points. Actual production routing is performed at this juncture. |
|
8 |
Decision |
Not selected |
|
9 |
Routing_Logic folder |
Folder that holds all of the configured routing logic modules for the control site. |
|
10 |
Routing logic modules |
Modules that consist of function blocks to achieve a particular routing result in line with factory conditions. |
|
|
Step 1. Enable the Tracker Configuration User Interface for RCO. |
