The factory's Tracker engineers:

1. Stop the project; does a configuration update and re-starts the project.

2. Open the Point Control Panel.

3.  Add the configuration array points for the Eliminate Sources Based on Rule function block.

4. For each point:

1. Double-click the point to open its Point Control Panel Point Properties dialog box.

2. Select the Array tab.

3. Apply values to each array element as follows

	Parameter	Description		Point Array Values
		Value	Element
1	Attribute Name	RAM	0	RAMATTNAME
		RAM	1
		RAM	2
2	Attribute Value	MEM128	0	RAMATTVALUE
		MEM256	1
		MEM512	3
3	Upper Release %	30	0	RAMUPPERP
		40	1
		50	2
4	Lower Release %	20	0	RAMLOWERP
		25	1
		40	2

Result: The initial values (Element 0) display in the Point Control Panel list.

The configuration for Eliminate Source Based on Percentages evaluation is almost ready for runtime. RSA will enter the count values during runtime.

Note: The weight that will be assigned to failures still needs to be entered in the Set Block Weights function block.

Attribute Name	Attribute Value	Upper Release %	Lower Release %	Attribute: Release	Total Count
RAM	MEM128	30	20	TBD	TBD
RAM	MEM256	40	25	TBD	TBD
RAM	MEM512	50	40	TBD	TBD

More information

Example 4.2. Define an Eliminate Source By Percentages Evaluation.

---