The following parameters are no longer supported in version 7.0:
Alarm Parameters:
[Alarm]CPU |
Sets the CPU that the Alarm Server component is assigned to |
[Alarm]Primary |
Determines if this Alarm Server is the Primary Alarm Server |
[Alarm]Process |
Sets the CitectSCADA process the Alarm Server component is assigned to |
[Alarm]Server |
Determines whether this computer is an Alarm Server |
Client Parameters:
[Client]Display |
Sets the CitectSCADA computer as a Control Client |
[Client]Manager |
Sets the CitectSCADA computer as a View-only Client |
[Client]Primary |
The name of the primary CitectSCADA server |
[Client]Process |
Sets the CitectSCADA process the Control Client component is assigned to |
[Client]Standby |
The name of the standby CitectSCADA server |
Code Parameters:
[Code]AlarmShutdown |
Determines the Cicode function to run when Alarm Server component shuts down |
[Code]AlarmStartup |
Determines the Cicode function to run when Alarm Server component starts up |
[Code]AutoReRead |
Controls whether the ReRead() function is automatically called |
[Code]IOServerShutdown |
Determines the Cicode function to run when I/O Server component shuts down |
[Code]IOServerStartup |
Determines the Cicode function to run when I/O Server component starts up |
[Code]Process | Sets the process a code component is assigned to |
[Code]ReportShutdown |
Determines the Cicode function to run when Reports Server component shuts down |
[Code]ReportStartup |
Determines the Cicode function to run when Reports Server component starts up |
[Code]Shutdown |
Determines the Cicode function to run when Control Client component shuts down |
[Code]Startup |
Determines the Cicode function to run when Control Client component starts up |
[Code]TrendShutdown |
Determines the Cicode function to run when Trends Server component shuts down |
[Code]TrendStartup |
Determines the Cicode function to run when Trends Server component starts up |
DNS Parameters:
[DNS]<Server name> |
Determines the IP address (or fully qualified host name) of the primary I/O Server |
Event Parameters:
[Event]Alarm |
The classes of events to be enabled by the Alarm Server |
[Event]IOServer |
The classes of events to be enabled by the I/O Server |
[Event]Name |
The classes of events assigned to the Name entry to be enabled |
[Event]Report |
The classes of events to be enabled by the Reports Server |
[Event]Trend |
The classes of events to be enabled by the Trends Server |
General Parameters:
[General]BadOptimise |
Determines whether certain strings are replaced with labels on compile |
[General]CitectRunningCheck |
Checks if a project is currently running on the local machine when a compile is triggered |
IOServer Parameters:
[IOServer]BlockWrites |
Determines whether CitectSCADA will try to block optimize writes to I/O Devices. The IOserver will not block writes |
[IOServer]CPU |
Sets the CPU that the I/O Server component is assigned to |
[IOServer]Name |
The name of the default I/O Server |
[IOServer]Process |
Sets the CitectSCADA process the I/O Server component is assigned to |
[IOServer]SaveBackup |
This parameter has been superseded by SaveNetwork |
[IOServer]Server |
Determines whether this computer is an I/O Server |
LAN Parameters:
[LAN]Bridge |
Determines the bridge level |
[LAN]CancelOnClose |
For users with Novell NetBIOS emulator issues |
[LAN]Disable |
Enables/disables CitectSCADA from the LAN |
[LAN]GroupName |
Determines whether CitectSCADA uses the group name 'CITECT STATION50' or the computer name specified by the [Lan]Node parameter. |
[LAN]KillPiggyBackAck |
Controls whether CitectSCADA will try to optimize network protocols which support piggyback ACK |
[LAN]LanA |
Defines the protocol stack that CitectSCADA uses for NetBIOS communication |
[LAN]NetBIOS |
Enables/disables NetBIOS |
[LAN]NetTrace |
Determines whether the NetBIOS window is enabled on startup |
[LAN]NetTraceBuff |
Sets the number of trace buffers. |
[LAN]NetTraceErr |
Enables the error mode of the NetBIOS window |
[LAN]NetTraceLog |
Enables the logging mode of the NetBIOS window |
[LAN]Poll |
Puts CitectSCADA LAN communications into polled mode |
[LAN]RemoteTimeOut |
The timeout period for remote I/O Device write requests from a Control Client to the I/O Server |
[LAN]Retry |
The number of times to retry establishing communications after a timeout - before an alert message is generated |
[LAN]SendTimeOut |
The timeout to send a network packet across the network |
[LAN]SesRecBuf |
The number of receive NetBIOS Control Blocks (NCBs) that CitectSCADA uses for every session |
[LAN]SesSendBuf |
The number of send NetBIOS control blocks that CitectSCADA uses for every session |
[LAN]TimeOut |
The timeout to send a network packet across the network |
Proxi Parameters:
[Proxi]<I/O Server name> |
Defines a list of proxy server associations |
Report Parameters:
[Report]Primary |
Determines if this Reports Server is the Primary Reports Server |
[Report]Process |
Sets the CitectSCADA process the Reports Server component is assigned to |
[Report]Server |
Determines whether this computer is a Reports Server |
Server Parameters:
[Server]Name |
The name of the CitectSCADA server |
Trend Parameters:
[Trend]BlockByIODevice |
Verifies that I/O problems causing gaps for a trend tag do not cause gaps for every trend tag |
[Trend]CPU |
Sets the CPU that the Trends Server component is assigned to |
[Trend]Process |
Sets the CitectSCADA process the Trends Server component is assigned to |
[Trend]Redundancy |
Enables/disables trend redundancy action |
[Trend]Server |
Determines whether this computer is a Trends Server |
[Trend]StaggerRequestSubgroups |
Reduces network traffic by spacing out trend sample requests |