Applies To:
  • CitectSCADA 1.00 1.01 1.10 1.11 1.20 2.00 2.01

If you want Citect to communicate through a Netware internal bridge and you are using Windows for Workgroups 3.11 you need to use the IPX/SPX Compatible Transport with NetBIOS. You must also make sure that the Frame Type is the same as what is being used on file server. Otherwise, the CITECT network packets will not be able to transmit across the Netware File Server internal bridge making the Citect clients unable to connect to the Citect Servers. If this occurs you will get the hardware error "No server could be found" on the Citect clients. 

The default frame type is Ethernet_802.3. To set it to a different one, start the Network Setup in the WFW311 and select Setup with the IPX/SPX Compatible Transport with NetBIOS highlighted, and then choose the frame type.