| For Ethernet comms, the baud rate, data
bits, stop bits and parity fields are ignored. The IP address of
the RTU will have to be entered in the Special Opt field in the
following format: -i<RTU IP address> -p473. The IP address is
defined in the port list of the master RTU configuration. The
‘-p473’ parameter tells the RTU to use the Kingfisher protocol for
this Ethernet connection. The 473 is the default Ethernet port
number and should be used to get it online. Please refer to
the KB article Q5158 for Commmunication settings for KingFish
Driver. |
