4.2.31.27   Alarm Delay Time

Alarm Delay Time in milliseconds.  Specifies the time in Milliseconds for a tag to be beyond an alarm limit, before an alarm state is generated. The idea is to prevent noise or an alarm bouncing near an alarm limit. The SCADA node waits this period of time before sending alarm messages, if during this waiting period, the tag returns to a non-alarm value, then no alarm message is generated. The maximum value for analog alarm delay time (DELAYA) is a 6,000,000 milliseconds. Tag Field is .DELAYA.

Range:              0 - 6,000,000