Product:    ISaGRAF 4.0x
Date: 15-February-2000
File: Defining target IP address.htm
Subject: How to define the IP address of a target
Keywords: IP Address - configuration - target


In a project in the workbench, a target platform corresponds to a configuration.

To insert an ETCP network in the Hardware Architecture view, and connect the configuration to the network:

In  "connection properties" enter the IP address, such as, for example: and press OK to exit the dialog box.

magnify.gif (921 bytes)Note that these operations are described in the Help sections:


Copyright © 1999-2009 ICS Triplex ISaGRAF Inc. All rights reserved.