Pressing the Alarm Enable /Disable pushbutton will disable alarming for the selected tag (temporarily). The alarming will be disabled until the Alarm E/D pushbutton is presses again, the .ALMED tag field is changed or the SCADA node Restarts.
To Disable or Enable Alarming for a Tag from the Alarm Group Display:
1. Open the Alarm Group List.
OR F6 OR Right Click -> Goto -> Alarm Group
2. Select an Alarm Group.
3. Select the Tagname (or anywhere on the same line).
4. Select ALARM E/D pushbutton.
Note- an engineer or technician must create alarm groups in the Project Manager.