Power Mate i Model D/H has the following requirements and options.
|
Required Power Mate i Model D/H software. |
|
|
Required software and options. |
|
|
HSSB board options. |
|
|
Ethernet board options. |
|
|
Optional software and options. |
Required Power Mate i Model D/H Software
|
|
HSSB |
10MB Ethernet |
100MB Ethernet |
|
System Power Mate i-H |
88F0-2 or later |
88F0-08/88F1-01 or later |
88F1-07 or later |
|
System Power Mate i-D |
88E0-2 or later |
88E0-09 or later |
88E0-15 or later |
|
Boot Power Mate i-H |
881I-2 or later |
881I-2 or later |
881I-2 or later |
|
Boot Power Mate i-D |
881I-2 or later |
881I-2 or later |
881I-2 or later |
|
PMC Executive |
407B-01 or later |
407B-03 or later |
407B-03 or later |
|
10MB Ethernet Executive |
N/A |
6561-04 or later |
N/A |
|
100MB Ethernet Executive |
N/A |
N/A |
6567-04 or later |
Required Software and Options
|
Drivers & Library Option Bit |
A02B-0259-J847 |
|
Ethernet Option Bit |
A02B-0259-J862 |
|
Important: Ethernet requires both option bits. |
|
HSSB Board Options
|
HSSB Board |
A02B-0259-J200 (CNC Side) A20B-8001-0582/0583/960/961 (PC Side) |
Ethernet Board Options
|
Board # |
Executive |
Control |
|
A02B-0259-J293 |
6567 |
iD & iH |
|
A02B-0259-J230 |
6561 |
iD & iH |
Optional Software and Options
Basic Operation Package 1
(BOP)
|
Basic Operation Package 1 Option Bit |
A02B-0207-J810 |
Parameters for Open Systems
Software
The recommended parameters for Drivers and Libraries are:
|
Parameter |
Setting |
Description |
|
0 Bit 0 |
0 |
TV check. |
|
3201 Bit 2 |
1 |
Deletes the existing program before downloading a new program. |
|
3201 Bit 6 |
1 |
M02, M30, and M99 is program end. |
|
|
GE Fanuc HSSB and Ethernet Control Requirements. |
