Review:
Details about CNC Series |
|
List of partial CNC options |
|
CNC reference manuals |
Details about CNC Series
Important: Versions described are the minimum required. Listed parameters are the minimum recommended parameters that should be set. Some optional features and parameter settings may be required.
Series 0i - Model A/B/C CNC |
|
Series 150 – Model B CNC |
|
Series 150i – Model A/B CNC |
|
Series 160 / 180 – Model B/C CNCs |
|
Series 210 – Model B CNC |
|
Series 160i / 180i / 210i – Model A/B/P CNCs |
|
Series 300i / 310i / 320i Model A |
|
Power Mate Model H |
|
Power Mate i Model D/H |
List of partial CNC options
The following is a partial list that identifies some of the CNC options requiring additional parameter setup.
Tool Offset Data
Tool Life Management Data
Program Restart
Alarm History Data
Custom Macro Variable Data
Work Offset Data
Software Operator Panel
Communications: HSSB and Ethernet
CNC reference manuals
Notes
For more information, refer to the following manuals:
Power Mate H/D Motion Controller (High Speed Serial Bus Function) Operator's Manual (GFZ-62684EN-1).
Ethernet Board Data Server Board Operator's Manual GFZ-63354EN/02.
Fast Ethernet Board Fast Data Server Operator’s Manual GFZ-63644EN/02.
FAST Ethernet FAST Data Server for Series 300i/310i/320i-Model A Operator’s Manual GFZ-64014EN/01
The GE Fanuc Series:
Control types are:
L |
Laser |
M |
Mill |
P |
Punch |
T |
Lathe |
W |
Wire |
Generations are designated by A, B, C...
Example
160i-MA is short hand for FANUC Series 160i-Mill Type-Model A.
Hardware and Software Requirements. |