Series 150 Model B CNC has the following requirements and options.
|
Required Series 150 software. |
|
|
Required software and options. |
|
|
HSSB Board options. |
|
|
Optional software and options. |
Required Series 150 Software
|
System Series 150-MB |
A0D2-C or later |
|
System Series 150-TB |
A2D2-4 or later |
|
System Series 150-MB (with sub CPU) |
AADB-L or later |
|
System Series 150-MBMA |
A6DB-F or later |
|
System Series 150-MBMA2 |
ADCB,ADC2 or later |
|
Boot Series 150-MB |
6014-K or later |
Required Software and Options
|
Drivers & Library Option Bit |
A02B-0207-J801 |
HSSB Board Options
|
HSSB Board for 200VAC Power Supply |
A02B-0207-J200 (CNC Side) A20B-8001-0580/0581 (PC Side) |
|
HSSB Board for 200VAC Power Supply |
A02B-0207-J202 (CNC Side) A20B-8001-0960/0961 (PC Side) |
Optional Software and Options
Basic Operation Package 1
(BOP)
|
Basic Operation Package 1 Option Bit |
A02B-0207-J811 |
|
Software Operator's Panel Option Bit |
A02B-0162-J917 |
Parameters for Open Systems
Software
The recommended parameters for Open System Software are:
|
Parameter |
Setting |
Description |
|
0 Bit 0 |
0 |
TV check. |
|
20 |
16 |
Allows foreground download of part programs via HSSB. |
|
22 |
16 |
Allows background download of part programs via HSSB. |
|
21 |
16 |
Allows foreground upload of part programs via HSSB. |
|
23 |
16 |
Allows background upload of part programs via HSSB. |
|
2200 Bit 1 |
1 |
Deletes the existing program before downloading a new program. |
|
2200 Bit 3 |
1 |
M02 and M30 is program end. |
|
2201 Bit 6 |
1 |
Enables program editing during memory operation. |
|
2204 Bit 1 |
1 |
Allows the HSSB access to absolute position. |
|
7613 Bit 0 |
1 |
Allows the HSSB access to alarm, feeds, speeds, and position data. |
|
7613 Bit 1 |
1 |
Allows the HSSB access to actual feedrate. |
|
7613 Bit 2 |
1 |
Allows the HSSB access to actual spindle speed. |
|
7710 Bit 7 |
1 |
Allows the HSSB to get Check Program Display Information. |
|
|
GE Fanuc HSSB and Ethernet Control Requirements. |
