Series 150i - Model A/B CNCs have the following requirements and options:
Required Series 150i - Model A/B software. |
|
Required software and options. |
|
HSSB board options. |
|
Ethernet board options. |
|
Optional software and options. |
Required Series 150i - Model A/B Software
System Series 150i - MA<10 Axis |
F001-01/F006-03 or later |
System Series 150i - MA>10 Axis |
F601-01/F606-03 or later |
System Series 150i - MB<10 Axis |
F0A1-01 or later |
System Series 150i - MB>10 Axis |
F6A1-01 or later |
Boot Series 150i-MA |
60I8-07 or later |
Boot Series 150i MB |
60I8-09 or later |
10MB Ethernet Executive |
6563-10 or later |
100MB Ethernet Executive |
6568-01 or later |
Required Software and Options
Drivers & Library Option Bit |
A02B-0207-J801 |
Ethernet Option |
A02B-0xxx-J647 Where xxx is dependant on the CNC type. |
Note: Ethernet Requires Both option bits. |
HSSB Board Options
HSSB Board for 200VAC Power Supply |
A02B-0261-J101 (CNC Side) A20B-8001-0582/0583/960/961 (PC Side) |
Ethernet Board Options
A02B-0261-J011 |
6563 |
iA & iB |
A02B-0261-J012 |
6563 |
iA & iB |
A02B-0261-J151 |
6563 |
iA Only |
A02B-0298-J013 |
6568 |
iB Only |
A02B-0298-J152 |
6568 |
iB Only |
Optional Software and Options
Basic Operation Package 1 (BOP)
Basic Operation Package 1 Option Bit |
A02B-0207-J811 |
Software Operator's Panel Option Bit |
A02B-0xxx-J917 Where xxx is dependant on the CNC type. |
Parameters for Open Systems Software
The recommended parameters for Open System Software are:
Parameter |
Setting |
Description |
0 Bit 0 |
0 |
TV check. |
20 |
16 |
Allows foreground download of part programs via HSSB. |
22 |
16 |
Allows background download of part programs via HSSB. |
21 |
16 |
Allows foreground upload of part programs via HSSB. |
23 |
16 |
Allows background upload of part programs via HSSB. |
2200 Bit 1 |
1 |
Deletes the existing program before downloading a new program. |
2200 Bit 3 |
1 |
M02 and M30 is program end. |
2201 Bit 6 |
1 |
Enables program editing during memory operation. |
2204 Bit 1 |
1 |
Allows the HSSB access to absolute position. |
7613 Bit 0 |
1 |
Allows the HSSB access to alarm, feeds, speeds, and position data. |
7613 Bit 1 |
1 |
Allows the HSSB access to actual feedrate. |
7613 Bit 2 |
1 |
Allows the HSSB access to actual spindle speed. |
7710 Bit 7 |
1 |
Allows the HSSB to get Check Program Display Information. |
GE Fanuc HSSB and Ethernet Control Requirements. |