Series 160/180 - Model B/C CNCs have the following requirements and options.
Required Series 160/180 – Model B/C software. |
|
Required software and options. |
|
HSSB Board options. |
|
Optional software and options. |
Required Series 160 and180 - Model B/C Software
System 160-MB |
B0A1-20 or later |
System 180-MB |
BDA1-6 or later |
System 160-TB |
B1A1-17 or later |
System 180-TB |
BEA1-5 or later |
System 160-MC |
B0B1-1 or later |
System 180-MC |
BDB1-1 or later |
System 160-TC |
B1B1-1 or later |
System 180-TC |
BEB1-1 or later |
Boot 160-MB |
60M1-6 or later |
Boot 180-MB |
60M1-6 or later |
Boot 160-TB |
60M1-6 or later |
Boot 180-TB |
60M1-6 or later |
Boot 160-MC |
60M1-9 or later |
Boot 180-MC |
60M1-9 or later |
Boot 160-TC |
60M1-9 or later |
Boot 180-TC |
60M1-9 or later |
Required Software and Options
Drivers & Library Option Bit |
A02B-0207-J800 |
HSSB Board Options
HSSB Board for 200VAC Power Supply |
A02B-0207-J200 (CNC Side) A20B-8001-0580/0581 (PC Side) |
HSSB Board for 200VAC Power Supply |
A02B-0207-J202 (CNC Side) A20B-8001-0960/0961 (PC Side) |
HSSB Board for 24VDC Power Supply |
A02B-0207-J201 (CNC Side) A20B-8001-0580/0581 (PC Side) |
HSSB Board for 24VDC Power Supply |
A02B-0207-J203 (CNC Side) A20B-8001-0960/0961 (PC Side) |
Optional Software and Options
Basic Operation Package 1 (BOP)
Basic Operation Package 1 Option Bit |
A02B-0207-J810 |
Software Operator Panel Option Bit |
A02B-0201-J960 (Model B) A02B-0223-J960 (Model C) |
Software Operator Panel General Purpose
Switch Option Bit |
A02B-0201-J961 (Model B) A02B-0223-J961 (Model C) |
Parameters for Open Systems Software
The recommended parameters for Drivers and Libraries are:
Parameter |
Setting |
Description |
0 Bit 0 |
0 |
TV check. |
3201 Bit 2 |
1 |
Deletes the existing program before downloading a new program. |
3201 Bit 6 |
1 |
M02, M30, and M99 is program end. |
GE Fanuc HSSB and Ethernet Control Requirements. |