Series 160i / 180i / 210i- Model A/B/P CNCs

Series 160i, 180i, and 210i CNCs have the following requirements and options.

	Required Series 160i, 180i, and 210i Model A/B/P software.
	Required software and options.
	HSSB board options.
	Ethernet board options
	Optional software and options.

Required Series 160i, 180i, and 210i - Model A/B/P Software

	HSSB	10MB Ethernet	100MB Ethernet
System 160i - MA	B0F1-1 or later	B0F1-23 or later	B0F4-02 or later
System 180i - MA	BDF1-1 or later	BDF1-23 or later	BDF4-02 or later
System 160i - TA	B1F1-1 or later	B1F1-22 or later	B1F4-01 or later
System 180i - TA	BEF1-1 or later	BEF1-22 or later	BEF4-01 or later
System 160i - LA	B8F1-1 or later
System 160i - WA	B9F7-1 or later
System 180i - WA	B9F4-19 or later
System 160i - MB	B0H1-01 or later	B0H1-01 or later	B0H1-02 or later
System 180i - MB	BDH1-01 or later	BDH1-01 or later	BDH1-02 or later
System 180i MB5	BDH5-01 or later	BDH5-01 or later	BDH5-02 or later
System 160i - TB	B1H1-01 or later	B1H1-01 or later	B1H1-03 or later
System 180i - TB	BEH1-01 or later	BEH1-01 or later	BEH1-03 or later
System 160i - LB	B8H1-01 or later	B8H1-01 or later
System 180i - WB
System 160i - PB	B7H1-01 or later	B7H1-01 or later
System 180i - PB	B7H5-01 or later	B7H5-01 or later
System 210i -MA	DDF1-1 or later	DDF1-15 or later	DDF4-02 or later
System 210i - MB	DDEH1-01 or later	DDH1-01 or later	DDH1-02 or later
System 210i -TA	DEF1-1 or later	DEF1-15 or later	DEF4-031 or later
System 210i - TB	DEH1-01 or later	DEH1-01 or later	DEH1-03 or later
Boot 160i -MA	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 180i -MA	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 160i -TA	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 180i -TA	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 160i-LA	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 160i-WA	60M3-15 or later	60M3-15 or later	60M3-15 or later
Boot 180i-WA	60M3-15 or later	60M3-15 or later	60M3-15 or later
Boot 160i - MB	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 180i - MB	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 160i - TB	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 180i - TB	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 160i - LB
Boot 180i - WB
Boot 160i - PB
Boot 180i - PB
Boot 210i MA	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 210i - MB	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 210i -TA	60M3-5 or later	60M3-5 or later	60M3-5 or later
Boot 210i - TB	60M3-5 or later	60M3-5 or later	60M3-5 or later
10MB Ethernet Executive	N/A	6561-15	N/A
100MB Ethernet Executive	N/A	N/A	6567-01 or later 656A-02 (Embedded for iB only)
PMC Executive iA	406A-01 or later	406A-12 or later	406A-12 or later
PMC Executive iB	406G-01/406H-01 or later	406G-01/406H-01 or later	406G-01/406H-01 or later

Required Software and Options

Drivers & Library Option Bit	A02B-0207-J800
Ethernet Option Bit	A02B-xxx-S707 Where xxx is dependant on the CNC type.
Important: Ethernet for iA requires both option bits. Ethernet for iB requires only Ethernet option.

HSSB Board Options

HSSB Board

A02B-0236-J200 (CNC Side)

A20B-8001-0580/0581 (PC Side)

HSSB Board

A02B-0236-J202 (CNC Side)

A20B-8001-0582/0583/960/961 (PC Side)

Ethernet Board Options

Board	Executive Series	CNC Model
A02B-0236-J293	6567	iA (LCD)
A02B-0236-J140	6567	iA (LCD)
A02B-0236-J145	6561	iA (LCD)
A02B-0236-J292	6561	iA (LCD)
A02B-0265-J293	6567	iA (SA)
A02B-0265-J145	6561	iA (SA)
A02B-0265-J291	6561	iA (SA)
A02B-0265-J152	6561	iA (SA)
A02B-0281-J145	6561	iB (LCD)
A02B-0281-J292	6561	iB (LCD)
A02B-0281-J293	6567	iB (LCD)
A02B-0281-J146	6567	iB (LCD)
A02B-0281-J148	6561	iB (SA)
A02B-0281-J149	6567	iB (SA)
A02B-0281-J298	6561	iB (SA)
A02B-0281-J299	6567	iB (SA)
A02B-0281-J158	6561	iB (SA)
A02B-0281-J160	6561	iB (SA)
A02B-0281-J161	6567	iB (SA)
A02B-0281-J162	6567	iB (SA)
Built-in Port	656A	iB (LCD & SA)

Optional Software and Options

Basic Operation Package 1 (BOP)

Basic Operation Package Option Bit	A02B-0207-J810
Software Operator Panel Option Bit	A02B-0201-J960
Switch Option Bit	A02B-0201-J961

Software Operator Panel General Purpose

Switch Option Bit

A02B-0201-J961

Parameters for Open Systems Software

The recommended parameters for Drivers and Libraries are:

Parameter	Setting	Description
0 Bit 0	0	TV check.
3201 Bit 2	1	Deletes the existing program before downloading a new program.
3201 Bit 6	1	M02, M30, and M99 is program end.

More information

GE Fanuc HSSB and Ethernet Control Requirements.

Series 160i / 180i / 210i - Model A/B/P CNCs