Series 210 - Model B CNCs have the following requirements and options.
Required Series 210 – Model B software. |
|
Required software and options. |
|
HSSB Board options. |
|
Optional software and options. |
Required Series 210 - Model B Software
System 210-MB |
DDA1-3 or later |
System 210-TB |
DEA1-1 or later |
Boot 210-MB |
60M2-4 or later |
Boot 210-TB |
60M2-4 or later |
Required Software and Options
Drivers & Library Option Bit |
A02B-0207-J800 |
HSSB Board Options
HSSB Board for 24VDC Power Supply |
A02B-0207-J201 (CNC Side) A20B-8001-0580/0581 (PC Side) |
HSSB Board for 24VDC Power Supply |
A02B-0207-J203 (CNC Side) A20B-8001-0960/0961 (PC Side) |
Optional Software and Options
Basic Operation Package 1 (BOP)
Basic Operation Package 1 Option Bit |
A02B-0207-J810 |
Software Operator Panel Option Bit |
A02B-0218-J960 |
Software Operator Panel General Purpose
Switch Option Bit |
A02B-0218-J961 |
Parameters for Open Systems Software
The recommended parameters for Drivers and Libraries are:
Parameter |
Setting |
Description |
0 Bit 0 |
0 |
TV check. |
3201 Bit 2 |
1 |
Deletes the existing program before downloading a new program. |
3201 Bit 6 |
1 |
M02, M30, and M99 is program end. |
GE Fanuc HSSB and Ethernet Control Requirements. |