Maintenance Events define when export, purge, and command actions will be performed on the table.
You can specify that maintenance be triggered when:
A condition, such as low disk space, occurs or
On a periodic or gated interval
Any specified event will trigger maintenance actions.
Select the Maintenance Events tab in a data Table Properties dialog box.
Configuration options are as follows.
Timed/gated maintenance |
Specifies when maintenance will be triggered.
Use any combination of the options.
Option |
Description |
|
Periodic |
Triggers maintenance at regular intervals. Configuration for the Periodic configuration group includes: |
|
|
Checkbox |
Checked enables periodic maintenance. |
|
Value field |
Enter the time value. |
|
Interval field |
Select the time interval. Valid intervals are minutes hours days |
Synchronized |
Triggers maintenance at a selected time of day. Configuration for the Synchronized group includes: |
|
|
Checkbox |
Checked enables synchronizing. |
|
Time boxes |
Select hour (12 hours) and minutes. |
|
AM/PM |
Select AM or PM from the drop-down list. |
On digital point state |
Logs data while a digital point is in a selected state. Configuration for the On digital point state group includes: |
|
|
Checkbox |
Checked enables On digital point state. |
|
State |
Valid states in the drop-down list are: high low transition (high or low state) If a periodic time interval is specified Maintenance actions will be executed when the selected digital point is in the selected state. If a periodic time interval is not specified Maintenance actions are triggered when the specified digital point transitions to the selected state, or any time the digital point transitions (if transition is selected). |
|
Point |
Valid states are HIGH, LOW, and TRANSITION. If a periodic time interval is specified, maintenance actions will be executed when the digital point you choose is in the selected state. If a periodic time interval is not specified, the maintenance actions are triggered when the specified digital point transitions to the selected state, or any time the digital point transitions (if transition is selected). |
Triggered maintenance |
Specify if and when maintenance events should be triggered.
Use either or both of the following conditions.
Condition |
Description |
|
Disk space low |
A drive's space falls below a specified size. Configuration for the Disk space low group includes: |
|
|
Check box |
Checked enables Disk space low. |
|
Drive |
Select the drive. |
|
Space remaining |
Megabytes Maintenance events occur when space falls below the threshold specified in this field. |
|
Note: The disk is checked at an interval that you specify on the Parameters tab the Logging Properties dialog box. |
|
Logging count |
The logging count exceeds a specified number. |
|
|
Check box |
Checked enables Logging count. |
|
Field |
Number of records. Maintenance actions will be executed when the number of records logged to the table reaches a multiple of this number. Example You specify 500. Maintenance actions are executed when the count reaches 500, 1000, 1500, etc. Note: If you check both conditions maintenance is triggered when either condition occurs. |
Important: Record deletion may not actually free disk space; this can depend your DBMS. Consult your DBMS documentation.
Review notes on timed/gated logging and timed/gated maintenance. |
|
Step 2. Configure CIMPLICITY point data logging properties. |