Please note the following about point addresses for the Mitsubishi A-Series Serial Communications enabler:
Letters in address entries can be upper or lower case
Leading zeros on address numbers are optional. Example: X003 is treated the same as X3.
Device with hexadecimal addressing may be specified in decimal by prefacing the number with D or d. Example: X00A can be entered as X0d10, XD10, X0D10, etc.
Address ranges may be limited by the address space available in the particular controller model.
Use BOOL Point Types for devices with Device Type Bit.
Do not use the Offset field (leave it with the default value of 0) for devices with Device Type Bit.
Mitsubishi A-Series Serial point configuration.