You should have one or more of the following documents available when configuring your SNP or SNPX communications network:
PACSystems CPU Reference Manual (GFK 2222 — for both RX3i and RX7i)
PACSystems RX3i System Manual (GFK 2314)
PACSystems RX7i Installation Manual (GFK 2223)
Series 90-20 Programmable Controller User's Manual (GFK 0501)
Series 90-30 Programmable Controller Installation Operator's and User's Manual (GFK 0356)
Series 90-70 Programmable Controller Installation Manual (GFK 0262)
If you are using a CMM card, you should also have the following manual available:
Series 90 Programmable Controller Serial Communications User's Maual (GFK 0582)
If you are using a VersaMax processor, you should have the following manual available:
VersaMax PLC User’s Manual (GFK-1503)
If you are using a VersaMax Nano or Micro
VersaMax Micro and Nano PLC User’s Manual (GFK-1645)
|
|
About SNP and SNPX Communications. |
