Important: Read (and if necessary re-organize) this
section and the scenario carefully. You will be asked to use this information to
graphically lay out the factory floor before you begin
configuration.
There is an area where the carriers reside until they are needed.
The various parts of the electronic product are verified and placed onto a carrier.
The product/carrier is then moved to the automatic assembly area where, depending on the decision criteria, it is automatically routed to one of two assembly machines.
After automatic assembly (regardless of which machine was used), the product is moved to the pack and ship area. (Only one area for pack and ship)
The assembled product is removed from the carrier.
Documentation is added, the product is boxed and placed onto a pallet
After four boxes have been placed onto a pallet, the pallet is moved to the warehouse for storage.
Electronic Product Attributes are:
|
Attribute Name |
Purpose |
|
CUSTOMER ORDER # |
Alphanumeric value |
|
COLOR |
Red, Green, or Blue |
|
CPU SER # |
Holds the CPU Serial Number |
|
BASE PLATFORM |
Checklist item |
|
DRIVE HOUSING |
Checklist item |
|
SUB_ASSEMBLY A |
Checklist item |
|
SUB_ASSEMBLY B |
Checklist item |
|
ASSEMBLY HOUSING |
Checklist item |
|
POWER SUPPLY |
Checklist item |
|
PROD START TIME |
Time/date of product start |
|
AUTOCELL MACHINE |
Machine Number |
|
AUTOCELL TEMP |
Temperature |
|
AUTOCELL PRESS |
Pressure |
|
AUTOCELL TIME |
Time/date of assembly |
|
CD_ROM |
Checklist item |
|
MANUALS |
Checklist item |
|
WARRANTY |
Checklist item |
|
PACK TIME |
time/date when packed |
|
|
