When you are configuring ports, devices, and device points, most of the information required is identical whether redundant or non-redundant device communications is configured.
The difference is you must configure a Mode Address field and this address must be properly configured in the PLC.
|
|
Series 90 TCP/IP Triplex Port Configuration. |
|
|
Series 90 TCP/IP Triplex device Configuration. |
|
|
Series 90 TCP/IP Triplex point Configuration. |
|
|
Series 90 TCP/IP Triplex Privpage. |
|
|
About Series 90 TCP/IP Triplex. |
