Driver dialog CoDeSys

Setting	Description
New	This button creates a new connection and then opens the dialog with the connection settings.
Edit	Opens the dialog with the connections settings for the currently selected connection in the list.
Delete	Deletes the currently selected connection in the list.

Dialog for connection settings

Setting	Description
Connection name	You can give any name you like for your connections.
Net address	Unique number of the connection. This number must be specified in the property "Net address" of the variable definition.
Local	The PLC is running on the same computer.
Remote	The PLC is running on a remote computer in the network. You can select a network computer with the selection button "...".
Port	The port number of the PLC. Default CoDeSys 1200 Default EPAS 5000
Protocol	Select a communication protocol. (TCP/IP Level 2 Route or Level 4)
Buffer size	Size of the communication buffer. Default CoDeSys 5000 Default EPAS 1500
Use login	Opens a communication channel
Default CoDeSys	Applies the default settings for CoDeSys PLCs. ATTENTION! Existing settings will be overwritten!
Default EPAS	Applies the default settings for EPAS PLCs. ATTENTION! Existing settings will be overwritten!
Ok	Applies settings and closes the dialog.
Cancel	Closes the dialog without applying any settings.

If a large number of variables is imported, the configured buffer size will be too small. In that case, you must increase the default value in the dialog window CoDeSys.