Driver dialog option |
|
MELSECA -> Configuration -> Settings in the driver dialog -> Driver dialog option |
   Show
all  Hide
all |
Driver dialog option |
|
MELSECA -> Configuration -> Settings in the driver dialog -> Driver dialog option |
| Show
all Hide
all |
|
Parameters |
Description |
|---|---|
|
AnA/AnUCPU
|
Defines the type of CPU that is connected. If the option is set, this means there were tests with a .... PLC. If the option is deactivated, this means there were tests with an A1SJ71C24-R2 communication processor. If the option is set, this means there were tests with a type A1SJ71UC24-R2. |
|
With Checksum
|
Determines whether the checksum is used in the protocol. This setting must match the settings on the communication processor. Only has an effect when using serial communication. |
|
TCP/IP |
If you set this option, communication will be performed via Ethernet and the TCP/IP settings will take effect. |
|
TCP/IP Connection file
|
This file holds the settings for each of the TCP/IP participants. |
