Picture element Set value

If the option 'Dialogbox' or 'Element' is set for the setting 'Set value via' of an element, and if the data point assigned to the element has a command interlocking, all changes to the set value are also performed via the command interlocking. The following requirements must be met, so that a value can be written:

The action 'Set value' must be configured for the command interlocking and the resulting action variable is the data point of the selected picture element.

There must be no command interlocking preventing the execution of the action.

Info

If one of the above requirements is not met, there is no write and no set value is written to the variable.