Description: Sends Point Tilt Zoom command (PTZ) to Video Cameras
Syntax:
<SENDPTZ>window=videotype#ip=address&options
Argument: Window is the user defined name given the Video Display Window. Video type is named after the WebAccess camera Driver. Address is an IP address, URL or network name. Options include paths to CGI scripts, port numbers, trim, and flag. Many options are camera dependent and are strings required by the specific manufacturer and model.
&cgi= used to specify a cgi script or path
&flag= used <SENDVDO>daq
command to set toolbar, status bar, Title bar and ViewDAQ
options.
&flag=2147519873 will remove the Title bar, Menu Bar,
Toolbar, status bar and display only the Graphic Display.
#ip= specifies the IP Address, URL, HOST Name or other valid network address to the camera. #ip=67.94.27.161 uses the IP address. #ip=sprout.warwick.ac.edu uses a url.
&port= is used to specify a TCP or UDP port to the camera. &port=8080 will use port 8080.
See Also:
SENDVDO, <DIALOG>VIDEO,
GOTO URL=vdo,
<GOTO>URL=vdo,<GOTO>VIDEO,<GOTO>WEBCTRL,
17.2.3.1 Video Popup Key Macro <GOTO>URL
17.2.3 Draw Video in User Graphic Display
Examples: The canon video camera handles preset functions. The following syntax can also be used in scripts and key macros to switch the Canon camera to its preset positions.
<SENDPTZ>v1=canonvc#ip=ip_address&port=port_num&cgi=-wvhttp-01-/OperateCameraPreset&cmd=value=preset_num
SENDPTZ can send commands to View in Graph. SENDCMD can be used to send macro commands to View/ViewDAQ but not View in Graph. In order to let users to send macro commands to View in Graph, we implemented an enhancement for SENDPTZ. The syntax is:
Macro: <SENDPTZ>name=daq#macro
Tcl Script: SENDPTZ name=daq#macro
VB Script: SENDPTZ "name=daq#macro"
JAVA Script: SENDPTZ("name=daq#macro");
Where name is the name of Video Display and macro is the macro commands intended for View contained in the Video Display.
To send macro commands to View in View/ViewDAQ which is usually invoked using “<GOTO>URL=daq: … ”, please use the same SENDPTZ syntax without name. That is:
Macro: <SENDPTZ>=daq#macro
Tcl Script: SENDPTZ =daq#macro
VB Script: SENDPTZ "=daq#macro"
JAVA Script: SENDPTZ("=daq#macro");
View in Graph is where a window is created inside a bgr using “Draw Video”. Then use a uti:daq command to call a graphic display rather than a video camera. See 4.5-2005.07.05 notes for more information about view in graph.
Please note that neither View in Graph nor the enhancement for SENDPTZ is officially supported.