Alarm to Normal Delay Time in milliseconds.  Discrete Tags only.  Specifies the time in Milliseconds for a tag to be in a Normal Condition after an Alarm Condition, before an alarm state is self-acknowledged without operator intervention.  This occurs only if Ack Alarm by Return to Normal is enabled in SCADA Node properties. If Reflect On Line changes to Database is enabled, changes will be saved in the Configuration Database on the Project Node (i.e. become permanent).

Range:              0 - 6,000,000
Units:                Milliseconds 
Field Type:        Analog
Configuration:   Alarm Delay Time
Tag fields:         .DELAYN        

See Also, Alarm Delay Time