You can configure a set of diagnostic points for each CIMPLICITY device. Each diagnostic point is automatically updated by the enabler at runtime to indicate the status of the controllers. These diagnostic points should be analog UINT device points. There are three diagnostic points that are unique for the TCP/IP Redundancy device communication enabler. They are:
|
The mode point provides an overall indication of the state of the device itself. It is only available for redundant model types. |
|
|
The Status point provides an overall indication of the state of the device/cable. |
|
|
The Data Source point indicates which device/cable is supplying the current data. |
There are two diagnostic points that are used to directly access the PLC and IO Fault Tables. They are:
|
The %PLC_FAULT point directly accesses the PLC Fault Table. |
|
|
The %IO_FAULT point directly accesses the IO Fault Table. |
|
|
Configure Series 90 TCP/IP Triplex points. |
|
|
About Series 90 TCP/IP Triplex. |
